Parameters
The 4D Taylor-expansion lattice (BQS) equation of state module has a variety of parameters for the calculation of the equation of state. The output file will correspond to the selected parameter choices.
As described in the Quickstart, the user must provide a config.yaml file. The purpose of this file is to supply all the configuration information required to run the module, such as input data and program options. The rules for this input file are specified in the OpenAPI 3.0.0 Specifications file provided with the module.
Each time the module is executed, it reads the config.yaml file provided by the user and verifies that the input conforms to the OpenAPI specifications. If it does not, module execution will be unsuccessful. When this happens, make sure to check the logs to identify the issue with your configuration.
It is not necessary to specify every single parameter in the configuration file. If any parameter is omitted, it will be automatically assigned its default value. The default values for each parameter can be found in the OpenAPI specification.
Upon successful execution, the module may produce several output files. These
are described in the OpenAPI specification as part of the output schema.
Not all of these files are created during every run, and some require the user
to specify particular options in the config.yaml file.
Below are tables providing a brief overview of module’s input, semi-internal and output parameter files. These include parameter names, default values, and descriptions similar to those in the OpenAPI specification file for the module.
Input Parameters
The input parameters required to execute the BQS module are presented in the table below. All parameters have default values in case the user does not specify any. Complete details are given in the module’s OpenAPI specifications.
Category Description |
Input Parameter |
Default |
Description |
Grid |
|
|
Minimum temperature (in |
|
|
Maximum temperature (in |
|
|
|
Step size in temperature (in |
|
|
|
Minimum baryon chemical potential
(in |
|
|
|
Maximum baryon chemical potential
(in |
|
|
|
Step size in baryon chemical
potential (in |
|
|
|
Minimum electric charge chemical
potential (in |
|
|
|
Maximum electric charge chemical
potential (in |
|
|
|
Step size in electric charge chemical
potential (in |
|
|
|
Minimum strange chemical potential
(in |
|
|
|
Maximum strange chemical potential
(in |
|
|
|
Step size in strange chemical
potential (in |
|
Switchers |
|
|
Store pressure in the output |
|
|
Store entropy density in the output |
|
|
|
Store baryon density in the output |
|
|
|
Store electric charge density in the output |
|
|
|
Store strangeness density in the output |
|
|
|
Store energy density in the output |
|
|
|
Calculate and store the isentropic speed of sound in the output |
|
|
|
Calculate and store the second-order
derivatives of pressure w.r.t.
|
|
|
|
Store the 0th, 2nd and 4th order susceptibilities at zero chemical potentials in the output |
|
|
|
Store the first-order temperature derivatives of the susceptibilities at zero chemical potentials in the output |
|
|
|
Store the second-order temperature derivatives of the susceptibilities at zero chemical potentials in the output |
Following is an example of a typical config.yaml for the BQS module:
parameters: T_min: 30 T_max: 50 dT: 5 mu_B_min: 0 mu_B_max: 10 dmu_B: 5 mu_Q_min: 0 mu_Q_max: 10 dmu_Q: 5 mu_S_min: 0 mu_S_max: 10 dmu_S: 5 switchers: get_P: True get_s_dens: True get_B_dens: True get_Q_dens: True get_S_dens: True get_E_dens: True get_c_s: True get_P_derivatives_finite_mu: True get_Chis_zero_mu: True get_dChisdT_zero_mu: True get_d2ChisdT2_zero_mu: True
Semi-internal variables
The input parameters required to run the BQS equation of state are the coefficients \(a_{0-9}\), \(b_{0-9}\) and \(c_0\) of the parameterization used to obtain the lattice-based susceptibilities, as explained in the Physics overview.
By default, the module uses an updated parametrization, whose coefficients are obtained from the most recent set of continuum-estimated lattice QCD susceptibilities [1], and stored in REF-BQS_eos_input_coef_new.yaml, an auxiliary input file placed in the test/Ref_files/ repository.
An older parametrization, the original one of this form [2], is also supported via BQS_eos_input_coef.yaml, with default values stored in REF-BQS_eos_input_coef.yaml.
In principle, one can update the values of either set of coefficients based on a similar fit to new lattice data. To do so, one can either simply change the corresponding “REF-” file as is, or place the resulting file, without the “REF-” prefix, in the input/ repository, and execute the module by calling this input file after the config.yaml file. Since neither of these coefficient files is required to run the module, if no such file is provided by the user, the coefficients will be read from the new-format “REF-” file by default.
Output Parameters
The output files generated by the module are in .csv format, and are stored in the output/ directory, assuming they have to be produced according to the different switchers.
BQS_eos_output_thermodynamics.csv: this file contains values for thermodynamic observables such as pressure, energy density, charge densities, entropy density or second-order derivatives of pressure, as a function of temperature \(T\) and the conserved charge chemical potentials, i.e. \(\mu_B\), \(\mu_Q\) and \(\mu_S\).
BQS_eos_output_chis.csv: this file contains the values of all susceptibilities of \(0^{th}\), \(2^{nd}\) and \(4^{th}\) order used in the construction of the EoS, as a function of the chosen temperature grid, at zero chemical potentials only.
References